Click image to view full size image
4 Channel Passive CCTV Video Balun / Video Transceiver / UTP Balun VB140A
4 Channel CCTV UTP Cat5 BNC Balun for CCTV Camera's (VB140A)
Description:
The video balun VB140A is a passive transmission device that transmits video signal over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet (330 m). It uses Category 5 UTP, are easy to install and cost effective, and do not require power. Working with 8-core CAT-5 can transport 4 channel video signals.
Its crosstalk and noise immunity ensure quality video signals.
Features:
1. Full-motion CCTV video at distances up to 330m when used with any passive transceiver
2. Up to 1500m with any active UTP video receiver
3. Outstanding interference rejection, transient protection
4. High quality image
5. It can work as video transmitter or video receiver
6. Compact size and easy installation
7. With 4ch pigtail BNC male connector
8. Steel case and spray painting
9. Connectors: Terminal block, RJ45, BNC male connector
Technical specifications:
4 Channel CCTV UTP Cat5 BNC Balun for CCTV Camera's (VB140A) | ||
Video Format |
NTSC, PAL, and SECAM |
|
Frequency Response |
DC to 5MHz |
|
Attenuation |
0.5dB typ |
|
CMRR |
60 dB |
|
Impedance |
Coax, Male BNC |
75 ohms |
Terminal Block |
100 ohms |
|
Working environment |
Working Temperature |
-10℃ to +50℃ |
Storage Temperature |
-30℃ to +70℃ |
|
Humidity |
0 to 95% |
|
Wire Type |
UTP5 |
|
Connector |
Male BNC, RJ45 and Terminal Block |
|
Power |
No power required |
|
Case |
Steel case, spray painting |
|
Dimension |
130mm*63mm*23mm |
|
Weight |
266g/pc |
|
Connection method:
Clamp modular plugs for a Cat-5 unshielded twisted pair wire according to the connection order of TIA/EIA-568B (please refer to the following figure)，connect the clamped modular plugs to the RJ45 sockets, connect the coax to the connection terminal.
Application:
CCTV Accessories, cctv system, cctv Security, cctv coaxial cable installation, CCTV surveillance accessories, cctv coaxial cable